1) WITHOUT battery power to the crumble (just USB power) and using a connection from + to the input pads:
em – AFAIK – that is not a valid operation – with just USB power – the + pins are indeterminate state (neither Hi or LO) so anything that happens after that is in the lap of the gods 🙂
3. Yep – that’s what you get with Alpha software 🙂
4. I’ve jsut disconvered that internally Crumble doesn’t handle a speed of 0 – basically it has FORWARD/REVERSE/OFF so I need to set its internal action value to OFF (At which point it ignores the speed value)
- This reply was modified 5 years, 2 months ago by Simon.