September 21, 2015 at 10:31 am #2692
I’m really keen to have a proper play with my crumbles, but I must be doing something fundamentally wrong 🙁
I’ve followed the guidance, downloaded V0.21 of the software and am running ios 10.10.5 (Haven’t found any drivers to download so assuming there aren’t any)
Here’s the thing. When I run the attached first program I can get the sparkle to light up red.
But when I tweak it to blink by adding waits and switch off tiles to the loop (see other attachment), nothing happens???
Attachments:September 21, 2015 at 11:39 am #2695JosephKeymaster
After altering the program you need to press the green ‘Play’ button again (to send the new program to the Crumble). If you’ve already done this, what message do you see in the toolbar? E.g. ‘Programming successful’ or ‘ERROR: Crumble not found’.
All the best,
JosephSeptember 21, 2015 at 11:42 am #2697
Yeah I’m doing that to update the program on the crumble. I get the “Programming Successful” message, but it no worky.September 21, 2015 at 11:46 am #2698JosephKeymaster
Hmmm… Strange. Could you try and replace the ‘turn Sparkle off’ command with a command to set the sparkle to a different colour?
In fact, if you could make the first colour not red to see if that line is executed.
Also, can I just check you’ve got a battery pack connected too?
JosephSeptember 21, 2015 at 1:08 pm #2699
- You must be logged in to reply to this topic.