June 13, 2016 at 1:19 pm #3567MikeParticipant
I’m thinking of using some M3 or M4 machine fixings, partly to increase the available croc clip space on the + – terminals, but also for mounting the crumbles.
I have M2 bolts which seem a bit loose. Will M4 fit? Or are they too big?
MikeJune 13, 2016 at 1:22 pm #3568JosephKeymaster
The holes are 4mm diameter, so M4 should just fit. M3 machine screws with a countersunk head work quite well – the head keeps the screw centred leaving plenty of clearance between them.
JosephJune 13, 2016 at 1:29 pm #3570MikeParticipant
Hey! That was quick 🙂
So I shouldn’t have to force M4 bolts through the holes? Sounds good.
Hope you guys are keeping well!
- You must be logged in to reply to this topic.