Home 2018 Forums Crumble Support Motors and sensors

  • This topic has 1 reply, 2 voices, and was last updated 2 months ago by dom.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #22616
    Sophie_Nelson
    Participant

    I recently bought a crumble bot off of 4tronix and while i was coding and testing, the motor lights turned red and flickered a-bit. I was trying to see what was wrong and found if the sensors where non-lit it would not work. I kept on tryin with the simple code of:
    Program start
    Do forever
    Motor 1 forward at 25%
    Motor 2 forward at 25%
    Loop

    Then it would not work still so i changed the batteries and waited for 2 hours to give it a break. Though it still would not work and then nothing really work and the crumble was making buzzing and ticking noises. What do i do?

    #22650
    dom
    Participant

    Have you tried running the motors at 100% instead?

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.